Micro Station_How to create a cell

1. Draw a cell first, then click "define cell origin".

Microstation_Batch Print

At first, I am not recomand this method because the situation of drawings are much different. It is difficult to get qualified print. but if for information only, batch print will save you lot of time.

1. Click File then "Batch Print".

Microstation_How to modify title block without change the original one

Sometimes, difference department use similiar title block. it need change a little bit, for example: erase one line, or some text. but we can not change the default title block according the company rule. So, what can we do?

*The idea is mask it.
1. Fence the part that you want the mask.
2. Click File-Reference-Tools-Clip Mask

Microstation_How to create a new drawing_correct method

Many of us, just open the old drawing, then "save as". Most of times, it works. but it the drawing that you pick up has some trouble, then the trouble will carry into your new drawing. So, what is the correct method to create a new drawing?

Microstation_How to print a long roll drawing

1.    Click Printer symbol, then preview.

    2.    Click “Setup” then “Page”. Take off the check mark from Rotate 90^o.
 

3.    Change “width” 34 into 300. Then click “ok”. Then see the preview as below.

4.    Now, plot. (Check if there is enough long paper, just in case the paper will be run out during the printing.)

Microstation_How to change back to default color table

Color table setting: (sometimes, the whole drawing color shows only one colour)
1.